top of page

Labino UV Inspection Lights & UV Torches for NDT Inspection

Labino UV inspection lights are high-performance UV-A inspection lamps and torches designed for non-destructive testing (NDT) applications.

​

Used across aerospace, oil & gas, manufacturing, and quality assurance industries worldwide, Labino products deliver reliable fluorescent inspection performance for magnetic particle inspection (MPI) and dye penetrant inspection (FPI/DPI).

​

As a UK supplier of Labino UV inspection lights, we provide expert guidance and access to the full product range, helping you select the correct UV-A solution for your application and compliance requirements.

​

All products are engineered to meet key international NDT standards including RRES 90061, ASTM E3022, ISO 3059, and major aerospace specifications.

Labino UV HandHeld Light for NDT Inspection - Labino MB 3.0

We know it can be difficult selecting the optimum UV Light with so many models & options available.  

​

See our handy guides below or feel free to contact us to arrange a demonstration, discuss compliance or help select the correct UV light for your application.

UK APPROVED SUPPLIER    |      TECHNICAL SUPPORT ON HAND      |     UK STOCK HELD & FAST UK DELIVERY TO AVOID DOWNTIME

What is a UV Inspection Light?

A UV inspection light is a specialised ultraviolet-A (UV-A) lamp or torch used in non-destructive testing (NDT) to reveal surface and near-surface defects that are invisible under normal lighting conditions.

​

These lights operate at a wavelength of 365nm and are typically used in combination with fluorescent dyes, particles & penetrants during processes such as magnetic particle inspection (MPI) and fluorescent penetrant inspection (FPI/DPI). When UV-A light is applied to the above following the manufacturers procedure with curing/dwell times, fluorescent indications glow brightly, allowing inspectors to identify cracks, porosity, fatigue defects and other surface indications with high accuracy.

​

UV inspection lights are essential in industries where safety and structural integrity are critical, including aerospace, oil and gas, manufacturing, and power generation. To ensure reliable results & testing compliance, we supply UV inspection lamp versions that are able to meet strict performance standards such as RRES 90061, ASTM E3022 and ISO 3059.

​

Our modern LED UV inspection lights provide stable UV output, instant start-up, lower heat generation and improved inspection consistency compared with traditional mercury vapour lamps.

​

Labino UV inspection lights are widely used in these applications due to their high UV intensity, stability, beam uniformity, and compliance with international NDT requirements.

​

Common uses of UV inspection lights:​

  • Fluorescent Magnetic Particle Inspection (MPI).

  • Fluorescent Penetrant Inspection (FPI/DPI).

  • Leak detection inspection & testing.

  • Aerospace component inspection.

  • Food processing, sanity, cleanroom & many more.

How to Choose the Correct UV Inspection Light

Selecting the correct UV inspection light depends on the inspection method, inspection environment, applicable industry standards and the size of the inspection area.

 

Different UV-A inspection lights are designed for handheld inspections, large-area coverage, aerospace inspections, confined access areas and hazardous environments.

​

At Advanced NDT, we help customers select the most suitable UV inspection lamp based on UV intensity requirements, beam profile, portability, compliance standards and inspection application.  

UV Intensity Requirements

UV-A intensity is one of the most important factors in fluorescent inspection performance. Inspection procedures used in aerospace and critical engineering applications often specify minimum & maximum UV-A intensity levels in accordance with ASTM E3022, ISO 3059, Rolls-Royce RRES 90061 and Airbus inspection requirements.

​

A high-quality UV inspection light should provide stable and consistent UV-A output across the inspection area while maintaining low visible white light levels. This improves fluorescent indication visibility and helps ensure reliable defect detection during MPI and penetrant inspections.

Beam Profile & Inspection Coverage

Different inspection tasks require different UV beam characteristics.

 

Wide-beam UV inspection lights are ideal for large-area inspections, production environments and aerospace components where broad, even coverage improves inspection efficiency.  Models such as the Labino BB 2.0 Series & the Labino Hera SB offer the widest beam profile.

​

Focused-beam handheld UV torches are better suited to confined areas, detailed component inspections and portable field inspections where high UV intensity is required in smaller inspection zones.  Models such as the UVG 2.0 Torches & Labino MB 3.0.

​

Beam uniformity is also important, particularly in aerospace inspection applications where consistent UV coverage helps improve inspection repeatability and compliance.  All Labino UV Lights come with certification & uniform beam patterns.

Handheld vs Mains-Powered UV Inspection Lights

Handheld UV inspection Lights & Torches offer excellent portability for field inspections, maintenance inspections and confined access areas.  Rechargeable LED UV torches are commonly used for mobile MPI and penetrant inspection applications due to their compact size and ease of use.

​

Mains-powered UV inspection lamps are often preferred for fixed inspection stations, production environments and large-component inspections where continuous operation are required.

​

Choosing between portable and mains-powered UV inspection lights depends on inspection duration, inspection area size and operational requirements.  The Battery versions of the Labino MB 3.0 & Labino BB 2.0, can be operated from mains whilst charging.

Aerospace & Industry Compliance

Many UV inspection procedures used in aerospace and critical manufacturing industries require compliance with strict UV-A performance standards.  Labino UV inspection lights are widely used in applications requiring ASTM E3022, ISO 3059, Rolls-Royce RRES 90061 and Airbus AITM compliance with various models available.

​

Modern LED UV inspection lights provide improved stability, repeatability and reliability compared with older mercury vapour technology, making them suitable for demanding aerospace and industrial inspection environments.

​

Advanced NDT supplies UV inspection lights suitable for aerospace maintenance, precision engineering, weld inspection, oil & gas inspection and industrial quality control applications.

Why Choose Labino UV Inspection Lights?

Labino UV inspection lights are widely recognised in the non-destructive testing (NDT) industry for their high UV-A output intensity, excellent beam uniformity, compliance with demanding aerospace and industrial inspection standards, and consistent performance in critical inspection environments. 

Used worldwide throughout most major industries & relied upon by some of the largest & most recognised company names.

​

Designed for demanding applications, Labino products deliver reliable fluorescent inspection results across magnetic particle inspection (MPI) and fluorescent penetrant inspection (FPI/DPI), where accuracy and repeatability are essential.

​

Unlike general-purpose UV lamps, Labino inspection lights are engineered specifically for industrial NDT use, ensuring stable UV intensity, uniform beam coverage, and compliance with key international standards such as RRES 90061, ASTM E3022 and ISO 3059.

​

The Labino range includes both portable UV torches for field inspections and high-output UV-A lamps for workshop and production environments, making them suitable for a wide variety of inspection industries & differing customer requirements.

​

For organisations where safety, compliance, and defect detection accuracy are critical, Labino remains a trusted choice across aerospace, oil & gas, manufacturing, and quality assurance sectors.

​

As a specialist UK supplier of NDT equipment, Advanced NDT provides technical guidance and support to help customers select the correct UV inspection light for their inspection procedure, standards requirements and working environment.

​

Key benefits of Labino UV inspection lights:

​

  • High UV-A intensity for reliable defect detection

  • Consistent beam uniformity across inspection areas

  • Portable and fixed inspection solutions available

  • Designed for industrial NDT environments

  • Compliant with ASTM E3022 and ISO standards

Frequently Asked Questions About UV Inspection Lights

What wavelength is used for UV NDT inspection?

Most fluorescent NDT inspections use UV-A light operating at approximately 365nm wavelength, which provides optimal fluorescent response during MPI and penetrant inspections.

​

What is ASTM E3022?

ASTM E3022 is an industry standard covering the performance requirements for LED UV-A lamps used in non-destructive testing applications.

​

Are LED UV inspection lights better than mercury vapour lamps?

Modern LED UV inspection lights offer several advantages including instant start-up, lower heat generation, stable UV output, lower maintenance and improved portability.

​

What UV intensity is required for fluorescent MPI inspection?

Required UV intensity levels vary depending on the inspection specification and industry standard. Aerospace procedures commonly specify minimum UV-A intensity requirements for compliant inspections.

​

Which UV inspection light is best for aerospace inspections?

Aerospace inspections typically require UV inspection lights with high beam uniformity, stable UV-A output, low white light emission and compliance with standards such as ASTM E3022, Rolls-Royce RRES 90061 and Airbus AITM requirements. 

See our handy compliance table, or the compliance standards are listed on our product pages with the version they relate to.

Labino UV Inspection Light Range

Products

Applications of UV Inspection Lights in NDT

UV inspection lights are widely used across non-destructive testing (NDT) processes where fluorescent materials are used to detect surface and near-surface defects. Their ability to produce high-intensity UV-A light makes them essential for accurate inspection in safety-critical industries.

 Magnetic Particle Inspection (MPI)

UV inspection lights are critical in magnetic particle inspection (MPI), where fluorescent magnetic particles are applied to ferromagnetic materials. Under UV-A light, these particles clearly highlight cracks, weld defects, and structural discontinuities.

This method is widely used in:

  • Weld inspection

  • Casting inspection

  • Forged component testing

  • Structural steel inspection

 Fluorescent Penetrant Inspection (FPI / DPI)

In fluorescent penetrant inspection (FPI/DPI), UV inspection lights reveal surface-breaking defects by causing penetrant materials to fluoresce under UV-A illumination.

Common applications include:

  • Aerospace component inspection

  • Automotive quality control

  • Precision engineering parts

  • Turbine and engine component testing

Aerospace Inspection

The aerospace industry relies heavily on UV inspection lights for NDT compliance and safety assurance. Inspections are carried out on critical components such as airframes, turbine blades, and landing gear using fluorescent NDT methods.

Oil, Gas & Energy Sector

In the oil and gas industry, UV inspection lights are used to identify defects in pipelines, welds, and pressure-containing equipment. This helps ensure compliance with strict safety and maintenance standards.

Manufacturing & Quality Assurance

UV inspection lights are widely used in manufacturing environments for quality control, ensuring that machined, cast, or assembled parts meet strict defect-free requirements before release.

​

UV inspection is also widely used within the Food & Beverage industry, cleanrooms & many other specific industries for health & safety, contamination & investigation.

Compliance

Compliance with relevant ASTM & ISO Standards as well as Industry Engineering specifications

Model:

Peak UV Intensity at 38.1cm/15" (uW/cm²)

Beam Diameter at 1000 μw/cm2:

Additional White Light

Mains/Battery Operation & Attachments

Compliance

Labino UV Inspection Torch

Labino UVG3 2.0 UV Torch:

Floodlight (L136)

4,000 μW/cm2

Midlight (L135)

Spotlight (L134)

9,000 μW/cm2

80,000 μW/cm2

4.8" / 12cm

4.2" / 10.5cm

3" / 7.6cm

Battery

Battery

Battery

ASTM E3022-2018, ISO 3059-12, Rolls-Royce RRES 90061, Airbus AITM6-1001,The Boeing Co, USAF, Pratt & Whitney.

ASTM E3022-2018, ISO 3059-12, USAF, Pratt & Whitney.

ASTM E3022-2018, ISO 3059-12.

ASTM E3022-2018, ISO 3059-12, Rolls-Royce RRES 90061, Airbus AITM6-1001,The Boeing Co, Pratt & Whitney.

Advanced NDT LTD Labino UVG5 2.0 Forensic ALS Head Torch UV Light Crime Scene CSI

Labino UVG5 2.0 Head Torch:

Floodlight UV (L131)

4,000 μW/cm2

Floodlight UV + WH (L130)

4,000 μW/cm2

Midlight UV (L129)

9,000 μW/cm2

Midlight UV + WH (L128)

Spotlight UV + WH (L127)

9,000 μW/cm2

80,000 μW/cm2

4.8" / 12cm

4.8" / 12cm

4.2" / 10.5cm

4.2" / 10.5cm

3" / 7.6cm

Battery

ASTM E3022-2018, ISO 3059-12, Rolls-Royce RRES 90061, Airbus AITM6-1001,The Boeing Co, USAF, Pratt & Whitney.

Battery

Battery

Battery

Battery

ASTM E3022-2018, ISO 3059-12, USAF, Pratt & Whitney.

ASTM E3022-2018, ISO 3059-12, Pratt & Whitney.

ASTM E3022-2018, ISO 3059-12.

Labino MB 3.0 - Advanced NDT

Labino MB 3.0 Handheld Light:

MB 3.0 Zeus

L118

L122

L119

4,000 μW/cm2

4,000 μW/cm2

4,000 μW/cm2

8.7" / 22cm

8.7" / 22cm

8.7" / 22cm

Battery

Battery + Athena Attachment

Mains

ASTM E3022-2018, ISO 3059-12, Rolls-Royce RRES 90061, Airbus AITM6-1001,The Boeing Co, Pratt & Whitney.

ASTM E3022-2018, ISO 3059-12, Rolls-Royce RRES 90061, Airbus AITM6-1001,The Boeing Co, Pratt & Whitney.

ASTM E3022-2018, ISO 3059-12, Rolls-Royce RRES 90061, Airbus AITM6-1001,The Boeing Co, Pratt & Whitney.

MB 3.0 Hermes

L118

L122

L119

4,000 μW/cm2

4,000 μW/cm2

4,000 μW/cm2

8.7" / 22cm

8.7" / 22cm

8.7" / 22cm

Battery

ASTM E3022-2018, ISO 3059-12, Rolls-Royce RRES 90061, Airbus AITM6-1001,The Boeing Co, USAF, Pratt & Whitney.

ASTM E3022-2018, ISO 3059-12, Rolls-Royce RRES 90061, Airbus AITM6-1001,The Boeing Co, USAF, Pratt & Whitney.

Mains

ASTM E3022-2018, ISO 3059-12, Rolls-Royce RRES 90061, Airbus AITM6-1001,The Boeing Co, USAF, Pratt & Whitney.

Battery + Athena Attachment

MB 3.0 Selene

L138

L140

L139

9,000 μW/cm2

9,000 μW/cm2

9,000 μW/cm2

7.9" / 20cm

7.9" / 20cm

7.9" / 20cm

Battery

ASTM E3022-2018, ISO 3059-12, Pratt & Whitney.

ASTM E3022-2018, ISO 3059-12, Pratt & Whitney.

Mains

ASTM E3022-2018, ISO 3059-12, Pratt & Whitney.

Battery + Athena Attachment

MB 3.0 Atlas

L124

L126

L125

9,000 μW/cm2

9,000 μW/cm2

9,000 μW/cm2

7.9" / 20cm

7.9" / 20cm

7.9" / 20cm

Battery

ASTM E3022-2018, ISO 3059-12, USAF, Pratt & Whitney.

ASTM E3022-2018, ISO 3059-12, USAF, Pratt & Whitney.

Mains

ASTM E3022-2018, ISO 3059-12, USAF, Pratt & Whitney.

Battery + Athena Attachment

Labino MB Hercules UV Inspection Light - Explosion Proof

Labino MB Hercules (Explosive Atmospheres) Handheld UV Light:

MB Hercules EX

L3000

4,000 μW/cm2

7.9" / 20cm

Battery

ASTM E3022-2018, ISO 3059-12, Rolls-Royce RRES 90061, Airbus AITM6-1001, The Boeing Co, USAF, Pratt & Whitney, EX-Approved.

Labino BB 2.0 UV LED Inspection Light

Labino BB 2.0 Large Beam Handheld Light:

BB 2.0 Ikaros

L1075

L1074

4,000 μW/cm2

10.6" / 27cm

Battery/DUO - L1075

            Mains  - L1074

ASTM E3022-2018, ISO 3059-12, Rolls-Royce RRES 90061, Airbus AITM6-1001,The Boeing Co, USAF, Pratt & Whitney.

BB 2.0 Helios

L1077

L1076

9,000 μW/cm2

11" / 28cm

ASTM E3022-2018, ISO 3059-12, USAF, Pratt & Whitney.

Battery/DUO - L1077

            Mains  - L1076

BB 2.0 Artemis

L1079

L1078

22,000 μW/cm2

10.3" / 26cm

ASTM E3022-2018, ISO 3059-12.

Battery/DUO - L1079

            Mains  - L1078

Labino Standard MPXL UV Inspection Light

Labino SB Hera - Extreme UV Intensity

SB Hera

L1095

L1096

90,000 μW/cm2

6.9" / 17.5cm

Battery/DUO - L1095

            Mains  - L1096

ASTM E3022-2018, ISO 3059-12.

Labino UV LED Light - Standards & Compliance

Help Choosing UV Light

Help Choosing the correct UV Light for your needs.

UV Inspection Lights are used in Non-Destructive Testing (NDT) for fluorescing fluorescent magnetic inks and fluorescent dye penetrants.  UV light or black light with a wavelength of 365nm creates the optimal viewing conditions.

​

Ultraviolet Lights Inspection Lights / Lamps & UV LED Blacklight Torches / Flashlights - For many NDT applications including: UV Non-Destructive Testing (NDT) such as Magnetic Particle Inspection (MPI) and Dye Penetrant UV Testing (DPI), UV Leak Testing, Purity Control, DNA Based Tracer Fluorescent Liquids (e.g. SmartWater™ Detection), Sanitation, Crime Scene Investigation, Forensics, Hotel Inspections, Art verification & restoration and more.

​

We have a very wide range of UV Lights to choose from such as Bulb or LED technology, mains operated, portable battery operated, combinations of both, hand-held, bench mounted, in varying cases and intensities etc - we have you covered.

 

All offer instant or near instant start up times, with no pre cooling etc.  Can be switched off and back on instantly & all operate with no external fans making them lighter and quieter, very useful in damp or dusty environments and require less maintenance.

 

  • They will still stay cool to the touch, especially useful in confined spaces. 

  • None of our lamps are affected by magnetic fields.

  • The battery models are fitted with current regulators to keep intensities stable when the battery power fades.

 

Our UV Lights are divided in to two main categories defining the light source technology the Lights are based on.  or LED (Light Emitting Diodes) or MPXL (Gas Discharge Bulbs) Standard MPXL 35w & SuperXenon MPXL 35w & 50w Lights.

bottom of page