top of page

Labino MB PRO Series
UV LED Lights

Labino MB PRO_edited.png

The New Labino MB PRO Series - Rugged UV LED Hand-held UV Inspection Lamps.

The Labino MB PRO is available from us in 4 x different versions to best suit your application & needs with differing UV intensities & compliance to relevant testing standards - models available for ASTM E3022-18, Rolls Royce RRES 90061 & Airbus AITM6-1001.

 The Labino MB PRO series has been newly introduced with the same high UV performance of the Labino MB 3.0 - but the PRO Series Models feature a tougher, more durable outer casing designed to perform in extreme temperatures and harsh working conditions & is made with penetrant resistant materials and certified with an ingress protection of IP68. 

​​​

Depending on the model, the beam diameter is 8-9 inches / 20-22 cm with intensities that vary from ≈ 4,500 to 9,000 μW/cm2.  Zeus and Selene models are additionally equipped with a strong white light for after inspection. 

Labino MB PRO_edited.png

Labino MB Pro Series

Labino MB PRO Series models: Zeus, Hermes, Selene and Atlas are Battery Powered lamps with an intense and wide UV-A output varying from 4,500 to 9,000 μW/cm2 & have been tested to comply with a number of NDT Standards. 

​

The Zeus and Selene models offer an additional strong white light for after inspection whilst the Hermes & Atlas Models are UV only for organisations who do not permit white light use during inspection.​

 The MB PRO Series lights offer high quality UV-A LEDs, with white light block filters that do not suffer from solarisation whilst providing a large coverage in excess of 8-9 inches / 20-22 cm dependent on model.

 

All MB PRO Series models have an ingress protection certification of IP68.

Labino MB PRO Details

Model Variations:

Labino MB PRO - Zeus

UV + WHITE LIGHT MODEL

Labino MB 3.0 UV LED Light Charging

The Labino MB PRO Zeus has been tested to comply with ASTM E3022-18 and ISO 3059-12 standards as well as the Rolls-Royce Engineering Specification RRES 90061 and Airbus AITM6-1001 Test Method.

 

The MB PRO Zeus generates an intensity of approximately 4,500 μw/cm2 at 38 cm (15 inches) and is equipped with a white light LED for after inspection.  This light is available only as a Battery version, if you require mains version - please see the Labino MB 3.0. 

 

The beam size generated above 1,000 μw/cm2 is approximately 9 inches / 22 cm.

​

Difference between Zeus and Hermes Model?

 The MB PRO Zeus is equipped with a strong white light LED that generates 1,076 lux (100 fc) for after inspection.

 The Hermes does not have a white light LED for organisations that do not allow the use of white light.

*The battery versions of MB PRO Zeus and MB PRO Hermes have a useful accessory, the Athena spray can holder, which works with all aerosol brands. Get it factory installed or add one later.

Part Numbers for MB PRO (ZEUS):
- Battery – L147

- Battery with Athena Accessory – L148

MB 3.0 Zeus - Conformity
MB 3 Comparison Zeus Hermes_edited.png

Labino MB PRO - Hermes

UV LIGHT ONLY MODEL

The Labino MB PRO Hermes has been tested to comply with ASTM E3022-18 and ISO 3059-12 standards as well as the Rolls-Royce Engineering Specification RRES 90061 and Airbus AITM6-1001 Test Method.

 

The MB PRO Hermes generates an intensity of approximately 4,500 μw/cm2 at 38 cm (15 inches).  This light is available in either Mains or Battery version, the running time of the battery version is 3.5 hours constant use (approx).  

​

THIS MODEL HAS NO WHITE LIGHT (See Zeus for White Light Version).

 

The beam size generated above 1,000 μw/cm2 is approximately 9 inches / 22 cm.

​

Difference between Zeus and Hermes Model?

 The MB PRO Zeus is equipped with a strong white light LED that generates 1,076 lux (100 fc) for after inspection.

 The Hermes does not have a white light LED for organisations that do not allow the use of white light.

Part Numbers for MB PRO (HERMES):
- Battery – L149

- Battery with Athena Accessory – L150

*The battery versions of MB PRO Zeus and MB PRO Hermes have a useful accessory, the Athena spray can holder, which works with all aerosol brands. Get it factory installed or add one later.

MB 3 Comparison Zeus Hermes_edited.png
MB-3_edited.png

UV + WHITE LIGHT MODEL

Labino MB PRO - Selene

MB PRO Selene has been tested to comply with both ASTM E3022-18 and ISO 3059-12 standards.

 

It generates an intensity of approximately 9,000 μw/cm2 at 38 cm (15 inches) and is equipped with a white light LED for after inspection.  This light is available as Battery version only, see MB 3.0 if you require mains only version. 

 

It is IP68 and is penetrant resistant.

The beam size generated above 1,000 μw/cm2 is approximately 8 inches / 20 cm.

​

Difference between Selene and Atlas Model?

 The MB PRO Selene is equipped with a strong white light LED that generates 1,076 lux (100 fc) for after inspection.

 The Atlas does not have a white light LED for organisations that do not allow the use of white light.

Part Numbers for MB PRO  (SELENE)

Battery – L151

Battery with Athena – L152

*The battery versions of MB PRO Selene and MB PRO Atlas have a useful accessory, the Athena spray can holder, which works with all aerosol brands. Get it factory installed or add one later.

Labino MB 3.0 Selene Atlas Specification UV LED Lights
MB-3_edited.png

Labino MB PRO - Atlas

UV LIGHT ONLY MODEL

MB PRO Atlas has been tested to comply with both ASTM E3022-18 and ISO 3059-12 standards.

 

It generates an intensity of approximately 9,000 μw/cm2 at 38 cm (15 inches) and is equipped with a white light LED for after inspection.  This light is available as Battery version only - please see Labino MB 3.0 for a mains version of this light. 

 

It is IP68 and is penetrant resistant.

​

THIS MODEL HAS NO WHITE LIGHT (See Selene for White Light Version of this light).

 

The beam size generated above 1,000 μw/cm2 is approximately 8 inches / 20 cm.

​

Difference between Selene and Atlas Model?

 The MB PRO Selene is equipped with a strong white light LED that generates 1,076 lux (100 fc) for after inspection.

 The Atlas does not have a white light LED for organisations that do not allow the use of white light.

Part Numbers for MB PRO (ATLAS)

​

Battery – L153

Battery with Athena – L154

*The battery versions of MB PRO Selene and MB PRO Atlas have a useful accessory, the Athena spray can holder, which works with all aerosol brands. Get it factory installed or add one later.

Selene Atlas_edited.png
MB-3_edited.png

What's Included?

Battery Version Includes:

1 x Choice of MB PRO Light version.

1 x Power Supply Unit (PSU) for charging whilst operating.

4 x Batteries (MB PRO takes 2 batteries, allowing the other 2 to be charged whilst not in use).

1 x External charger - (two batteries can be charged simultaneously). 

1 x 12V charger for use in a vehicle.

1 x Pair of UV Blocking Glasses.

1 x Hard Carrying Case.

1 x Belt Holster & Hand Strap.

Labino MB 3.0 What's Included

Labino MB 3.0 - HERCULES Ex

Labino Hercules MB 3.0 Explosion Proof UV LED Light
ATEX-Ex-Mark1-2-400x400_edited.png

Designed upon request of the military, the Labino MB Hercules Ex is probably the most durable and shockproof UV light in the world today, suitable for any “heavy duty” environment.

​

Labino MB Hercules Ex is an extremely durable product specifically developed for use in areas where the risk of an explosion is high, or in which the working environment is more extreme.

 

The use of explosion proof products is often a requirement in Offshore Oil Rigs, Refineries, Aerospace, and Defense industries. It has successfully completed extremely tough tests, amongst them tests for thermal conditioning, Impact Tests, Drop Tests & IP tests that led to the ATEX certification (Certificate: ITS17ATEX402144X).


This unique product is suitable for use in extreme weather conditions varying from +40° Celsius (104° Fahrenheit) to -20° Celsius (-4° Fahrenheit). 

This light is battery powered and has four UV LEDs that generate an

intensity of 4 000 µW/cm2 . A charger is supplied with each lamp enabling

users to charge the batteries without removing them from the lamp.

*Charging of batteries should only take place outside explosive atmospheres.

Labino MidBeam 3.0 Charging

Hercules Ex has been tested to comply with ASTM E3022- 18, Rolls-Royce RRES 90061 and Airbus AITM6-1001. A certificate of conformity is provided with every light as well as a 2-year warranty.

​

EXPLOSIVE ATMOSPHERE CERTIFICATIONS:

​

ATEX certified for Group II, Zone II (Certificate: ITS17ATEX402144X), IECEx, NFPA 70 Article 500 for Class I (divisions II locations), Explosive Atmosphere Test as per MIL-STD-810G.

Labino Hercules Features UV Light
Hercules.png

What's Included?

Hercules Ex Includes:

1 x Hercules Ex Light.

1 x Power Supply Unit (PSU) for charging whilst operating outside of explosive atmospheres.

4 x Batteries (Hercules takes 2 batteries, allowing the other 2 to be charged whilst not in use & outside of explosive atmospheres).

1 x External charger - (two batteries can be charged simultaneously outside of explosive atmospheres.). 

1 x 12V charger for use in a vehicle.

1 x Pair of UV Blocking Glasses.

1 x Hard Carrying Case.

Related Accessories

MB Variable Gooseneck Arm

Part No: A533

​

For use with all Labino MB 3.0 Series Battery Models

Labino MB Variable Gooseneck Arm A533 - The MB Arm has a clamp at the lower part that mounts on a bench or hard surface and a screw at the top especially designed to fit the MB series lights.  The heavy-duty snake shape body allows the user to form any angle required to keep the MB facing a specific position

MB_Variable_Gooseneck_Arm_-_A533_1024x1024_2x_edited.png
Labino Hercules UV LED Inspection Light - What's Included
Compare Models
What's Included
Hercules Ex Model
ZEUS
HERMES
SELENE
ATLAS
bottom of page