UV Spares & Accessories
Spares, add-ons & accessories for our range of UV Lights & Torches.
DUV-35W UV Bulb (MPXL)
UV Lamp / UV Bulb (DUV-35W) (Part Number: F101)
The Labino DUV-35W is an exceptional gas discharge UV Bulb / lamp manufactured in cooperation with Phillips. Our high pressure arc bulb is characterised by superior output performance, intense UV Light with a peak at 365nm, and a service life of over 2000 hours.
The Labino DUV-35W is suitable for use in all Labino MPXL 35W UV lights. Use the Labino DUV-35W bulb / lamp only with Labino electronic trigger ballast - Automotive ballast cannot be used.
Mounting Brackets & Stands
Mounting Brackets
For use with all Labino MPXL UV Lights and BB Series Lights.
Part Number: F800 - (U-Shaped Mounting Yoke)
Part Number: F801 - (Mounting Brackets - set of two)
Part Number: F802 - (Mounting Bracket with loop - set of two)
Stands
For use with Labino MPXL, BB and MB Series Lights
Part Number: A530 (Labino Friction Arm) - A high quality, flexible and easy-to-use support system, enabling the operator to work with two free hands. Jointed arm with just one large locking knob. Either free stand on the 3 leg base or clamp to bench etc. via the second clamp. Length: 53 cm (21”). Weight: 1.07 kg (2.35lb) arm only, 2.55 kg (5.61 lb) complete.
Part Number: A532 (UVG Variable Gooseneck Arm)
The UVG arm has a clamp at the lower part that mounts on a bench or a hard surface and a clamp at the top especially designed to fit the UVG series Torches. The snake shape body allows the user to form any angle required to keep the torch facing a specific position.
​
Part Number: A533 (MB Variable Gooseneck Arm)
The MB arm has a clamp at the lower part that mounts on a bench or hard surface and a screw at the top specifically designed to fit the MB series lights. The heavy-duty snake shape body allows the user to form any angle required to keep the MB facing a specific position.
UV Protection
UV Blocking Glasses & Face Shield, for use with all UV Lights.
Part Number: S505 XC (Regular Fit UV Blocking Glasses)
Part Number: S400 (UV Blocking Visor - Full Face protection)
MB Series Spares
Labino MB UV LED Light Spares - For use with the MB UV LED Lights
​
Part Number: F111 (Rubber Bumper)
Part Number: A504 (MB Belt Holster)
Part Number: A533 (MB Variable Gooseneck Arm)
Part Number: F105 (Thumb Screws)
Part Number: A601 (Magnet for PSU Holder)
Part Number: B115 (Spare Battery)
Part Number: B201 (External Battery Charger Set - UK)
Part Number: B321 (Internal Battery Charger Set - UK)
Part Number: B325 (PSU for Mains Only Models - UK)

UVG LED Torch Spares
UVG2 & UVG3 Spares - For use with all Labino UVG UV LED Torches.
Part Number: B201 (UK Battery Charger)
Part Number: B115 (Battery)
Part Number: B160 (Car Charger)
Part Number: A532 (UVG Variable Gooseneck Arm)
Part Number: F107 (UVG Rubber Bumper)
Part Number: C3100 (Hard Carry Case)
Part Number: A600 (Tripod Stand)

Handles, Straps & Misc. Spares
Miscellaneous spares for use with the Labino MPXL UV Lights
Part Number: F141 (Pistol Handle)
Part Number: F142 (Top Handle)
Part Number: F62 (Cable Bend Protection)
Part Number: S201 (On/Off switch)
Part Number: F60 (O-ring front)
Part Number: F143 (Shoulder Strap to suit TrAc Pack Standard & TrAc Pack Pro)
Part Number: F145 (Shoulder Strap to suit TrAc Light Pro)
Part Number: F61 (Heat Protection pin - one supplied)

Trigger Ballast Boards (MPXL)
Trigger Ballast - Electronics used in all MPXL Lamps (100-230VAC)
Part Number: F97 (100VAC)
Part Number: F98 (115VAC)
Part Number: F99 (230VAC)
Trigger Ballast - Electronics used in all MPXL Lamps (12/24VDC)
Part Number: F100 (12/24VDC)
Note: Trigger Ballast Boards must be fitted by a suitably qualified electrician. Trigger Ballast Boards carry a 12 month warranty only if installed by Labino approved suppliers
Mains Chargers & PSU’s (MPXL)
Mains Chargers - (For use with the TrAc Series of UV Lights)
Part Number: B132 (TrAc Pack Standard )
Part Number: B161 (TrAc Light)
Part Number: B136 (TrAc Light Pro)
Power Supply Units (PSU’s) - (For use with the TrAc Pack Pro UV Lights)
Part Number: B120 (230v PSU Unit - TrAc Pack Pro)
Part Number: B122 (115v PSU Unit - TrAc Pack Pro)
