Ultrasonic Flaw Detectors

The Avenger II by NDT Systems is a rugged lightweight, hand-held ultrasonic instrument utilised daily in the evaluation of Investment Castings, In Service Inspection, Plastics, Turbine blades, Tanks, Tubes and Pipes.

​

 A lightweight instrument weighing only 800 grams, the Avenger II allows for a grip-orientated weight distribution to maximize ultrasonic testing efficiency.  Single hand operation frees up the user’s other hand to manoeuvre the probe for a thorough inspection.

The Dakota CMX10-DL ultrasonic precision & corrosion thickness gauge with A-Scan and B-Scan capability.

Designed for through-coating measurement and precision inspection, it provides reliable material thickness readings in demanding industrial environments.

Ideal for NDT professionals requiring high-performance ultrasonic testing with detailed waveform analysis.

The SIUI Smartor is a combination of ultrasonic testing (UT) and ultrasonic thickness measurement (TG) in one gauge.

The Smartor is available as either an Ultrasonic Thickness Gauge or an Ultrasonic Flaw Detector with the option to upgrade the software to include both in the same unit. Many other optional software upgrades are available to suit your requirements.  

​

Weld simulation, One-Hand Operation, Smart Test Wizard and compact.

The Raptor by NDT Systems is a very high-performance Ultrasonic Flaw Detector with a Full Imaging system built in.

A low cost gauge with high accuracy defect mapping and recording.  Ideal for all tasks from Corrosion mapping to composite inspection.  A wide range of scanners are available to suit differing tasks.

One of our most popular ultrasonic flaw detectors.

The ISonic utPod Ultra-Portable Ultrasonic Flaw Detector & Thickness /  Corrosion Gauge.  Can be worn on the wrist giving hands-free operation, ideal for rope access work etc.

​

Top Performance Flaw Detector weighing only 400g

Features Include: • All-Functional A-Scan Thickness Gauge • Simple Corrosion Gauge • Through-Paint / Coating Thickness Measurement with Use of Regular Probes  • Far Side Wall Thickness Measurement in Tubes with Use of Regular Probes

The Curlin Air Contactless, Air Coupled, Ultrasonic Flaw Detector & Composite Bond Tester.

​

The portable Curlin Air utilises air-coupled ultrasonics and requires no surface preparation and no direct contact with test object.  It performs sensitive inspections to detect voids, impact damage, and disbonds in a wide variety of water-incompatible materials.  Originally used primarily for aerospace composites, the Curlin Air is referenced specifically by major aerospace manufacturers in their published inspection procedures. 

The ISonic 2008 a portable high specification Ultrasonic Flaw Detector with 8 independent test channels.

​

Inspect with up to 8 transducers simultaneously e.g. bracelet scanners.  A-Scan, B-Scan, CB (projection C-Scan for inaccessible areas), TOFD and strip chart presentations

​

​

​

​

​

The ISonic 2009 UPA Scope is a portable high performance Ultrasonic Phased Array Flaw Detector & Recorder with Conventional UT & TOFD Channels.

The ISonic 3505 an amazing performance (140dB dynamic range), full featured portable flaw detector and recorder.

A-Scan, B-Scan, CB-Scan (Projection C-Scan for testing inaccessible areas), C-Scan and TOFD.

- Video recording option & remote control facility.

The ISonic 3507 has all the features of the ISonic 3505 with the addition of Dual Channels for special requirements such as thick section TOFD. Data may also be presented in the form of strip charts

The Sonotron ISonic 3510 a Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector and Recorder with 2 Additional Channels for Conventional UT / TOFD

The ISonic 16/32 AUT is a Multi Channel Ultrasonic Flaw Detector for Automatic Ultrasonic Testing.

The ISonic PA AUT Platform for Automatic Ultrasonic Phased Array, TOFD & Conventional Pulse Echo Inspection.

The Socomate Ultrasonic PC Cards - USPC 7100LA (formerly USPC 3100). The benchmark in PC Based single channel pulser-receivers

The Socomate FAAST system is a unique Phased Array System that can generate multiple angles and multiple focal zones per pulse. Most PA units require several pulses to generate different angles, focal zones etc., slowing down the scanning speed. Using a patented pulser technology, the FAAST system can generate and evaluate multiple beams simultaneously. This allows the FAAST to be used for faster applications such as immersion scanning & on-line tube testing.