top of page

ISonic utPod

Ultrasonic Flaw Detector & Thickness /  Corrosion Gauge.

The ISONIC utPod manufactured by Sonotron delivers full functionality of the top performance ultrasonic detector such as;

  • Bi-polar square wave pulser with tunable shape, pulse duration and amplitude (up to 300 V pp) and boosted leading / falling edges enhancing ultrasound penetration for various materials characterized either by high or low grain, sound attenuation, and the like

  • 100 dB analogue gain / 0.2...25 MHz bandpass / 100 MHz sampling rate

  • 32-Taps FIR band pass digital filter with controllable lower and upper frequency limits

  • Analogue performance A-Scan with no range limit for RF display mode

  • Up to 2 kHz pulse repetition frequency

  • Multi-curve DAC, DGS / TCG

  • 2 independent gates

  • Automatic evaluation including trigonometric functions, thickness and curvature correction, etc

  • AWS / API defect evaluation

  • High Color Resolution QVGA screen – 3.2” Active Matrix LCD with an embedded PICASO-GFX2 graphics controller

  • Built-in horn and virtual lamps on the screen to alarm the defect indications

  • 2 on-board rechargeable long durability Li-Ion batteries

ISONIC utPod LF is the modified version of ISONIC utPod adopted for the low frequency ultrasound applications.  It is characterised by the appropriately modified frequency band of the receiver and the limits for manipulating duration of the initial pulse – (see technical data below).  ISONIC utPod LF is predominantly used for applications requiring low frequency, used for wind turbine inspection.

ISONIC utPod LF is suitable for the inspection of highly attenuating materials such as concrete, fibreglass, rubber, special purposes composites and other materials, etc.  The upper limit of the frequency band keeps the opportunity for the inspection of metals and the like.

The portable all functional remote controlled ultrasonic flaw detector ISONIC utPort was designed to carry the ultrasonic card of ISONIC utPod.  It was designed for being used either as a permanent sensor or a core element fitted into the frame of remotely operated vehicles (ROV).  Depending on the inspection task to be resolved ISONIC utPort is available in the regular or low frequency version with the parameters identical to ISONIC utPod or ISONIC utPod LF accordingly

The zero point test and annual verification procedures of ISONIC utPod and ISONIC utPod LF are fully compliant with the international standards below and the corresponding national norms

  • EN 12668-1 / ISO 22232-1. Non-destructive testing – Characterization and verification of ultrasonic examination equipment. Part 1: Instruments

ISSonic UTPod Flaw Detector Advanced NDT

ISonic utPod Key Features:

 Top Performance Flaw Detector

• Weighs only 400g, perfect for rope access work & can be worn on the wrist.

All-Functional A-Scan Thickness Gauge

Simple Corrosion Gauge

Through-Paint / Coating Thickness Measurement with Use of Regular Probes

Far Side Wall Thickness Measurement in Tubes with Use of Regular Probes

Supervisor Lock / Unlock Settings Function

Comprehensive Data Logger

Fully USB Controllable

ISsonic UTPOD Wrist Worn Advanced NDT LTD

ISonic UTPod Technical Data

UTPod Tech Data Advanced NDT.png
bottom of page