top of page

Labino BB 2.0 Series products (Helios, Ikaros & Artemis) are lights with a powerful and wide UV output perfect for dye penetrant testing, MPI, crack & leak detection & many more NDT UV inspection methods.

 

  • They provide large coverage and weigh less than many comparable products.
  • The mains operated model weighs just 1.2 kg (2.6 lbs) and the battery operated model weighs just 1.7 kg (3.7 lbs).
  • They are widely used for field inspections or on an MPI bench.

 

See our Products Page for technical specifications & brochures.

 

BB 2.0 Series lamps are penetrant resistant and have ingress protection 68 (IP68 Waterproof).  The BB 2.0 Series family of products has been specifically designed to meet the ASTM E3022-18 and ISO 3059-12 standards as well requirements set by the PRIMES.  The optics used in the BB 2.0 Series meet the Rolls-Royce RRES 90061 specification.

 

The beam profile of the UV light is extremely homogeneous without any footprints showing from the LED’s, shades, dark spots or other disturbing defects.  This lamp is based on LED technology and offers you a very narrow spectra with a peak wavelength of 365nm. Each unit consists of 8 ultraviolet LEDs. (Each LED’s life is estimated at 30,000 hours).

 All electronics as well as the LEDs are placed in a single rugged housing with the diameter not exceeding 15.5cm (6.1 inches).

 

Labino BB 2.0 - HELIOS

Part No: L1076 (Mains) & L1077 (Duo)

BB 2.0 Helios has been tested to comply with both ASTM E3022-18 and ISO 3059-12 standards. It generates an intensity of approximately 9,000 µw/cm² (90W/m2) at 38cm (15 inches).

The running time of the battery is 6 hours (constant use).

 

Labino BB 2.0 - IKAROS

Part No: L1074 (Mains) & L1075 (Duo)

BB 2.0 Ikaros has been tested to comply with both ASTM E3022-18 and ISO 3059-12 standards as well as with the internal requirements of all PRIMES seen in the table below, including Rolls-Royce RRES 90061 and Airbus AITM6-1001. It generates an intensity of approximately 4,000 µw/cm² (40W/m2) at 38cm (15 inches)

The running time of the battery version is 7 hours (constant use).

 

Labino BB 2.0 - ARTEMIS

Part No: L1078 (Mains) & L1079 (Duo)

BB 2.0 Artemis has been tested to comply with both ASTM E3022-18 and ISO 3059-12 standards. It generates an intensity of approximately 22,000 µw/cm² (220W/m2) at 38cm (15 inches).

The running time of the battery is 5 hours (constant use).

Labino BB 2.0 Series - UV LED Lights

£1,750.00Price
    bottom of page